is a remarkable piece of energy saving engineering that can be applied
readily to off-the-shelf components. Utilizes an AC motor - with a
modest change in the wiring, a motor rated to run at 460 volts on
3-phase, at 20 - 30 amps, can be made to run on 120 volts single phase,
and on a handful of amps (5 - 7 amps). This is done, by creating a
virtual 3rd phase utilizing capacitance. By tuning the capacitance, the
motor can be put into a self-semiresonant condition whereby the motor
runs with extreme efficiency and is cool to the touch at full rated rpm.
This is a PROVEN technological advance - which can be put into
operation worldwide to help stem the energy shortages reported to be on
the way globally.
This modified AC motor is referred to as the
RotoVerter. Several first-hand who have replicated the device are seeing
amazing results as the extra voltage circulating in the capacitor bank
used to create the virtual third phase, can also be utilized to charge
batteries as well and other loads. The beauty of being able to run these
motors in this manner, is not only the tremendous energy savings, but
provides one with the ability to go SOLAR as well.
Materialsto be used
2 Baldors 7.5 3PH (more detail below)
Inverter xantrex 1200watt modified sine wave
Solar panel 120 watt Deep cycle 12 volt battery Basic run and start caps (non electrolytic for run!)
Demo of the Rotoverter on a Electric Motor and Alternator 200 Watts to Run. Produces 1100 Watts